Pallet Truck Parts - Pallet stackers are a type of pallet jack that may be employed to stack, move and lift commodities positioned on a pallet that are far too heavy for manual lifting. Generally these mechanisms are utilized to load and unload supplies from trucks and to move pallets from one location to another within a stockroom of storeroom space. For the most part pallet stackers are built of heavy duty materials to endure tremendous weights. Pallet stackers are sometimes referred to as pallet jacks. They may be operated from a seated, upright or walk-behind position. Pallet stackers are separated into manual and powered varieties.
Certain basic components comprise the pallet stacker. There are forks which slide underneath a pallet, capable of transporting and lifting it to a desired height. The engine compartment or casing houses the gas-run, electronic or hydraulic apparatus that powers the appliance.
Manual pallet stackers are hand-powered. They run hydraulically to make hauling burdensome pallets an easier job. Typically a walk-behind version meaning they are operated by pulling and pushing the stacker to its preferred location. Utilizing a foot pedal or lever raises the stacker's forks. Squeezing a handle or trigger returns the forks to the floor. These types of pallet stackers are ideal for lighter loads of up to approximately 1 ton or 907.18 kg.
Most stackers may accommodate the lifting of extreme weights to around 5 tons with either the gas or electric versions. They are physically less demanding to maneuver than the labor-intensive models due to the hydraulic power that raises and lowers the forks. These styles are steered by rotating the handle in a specific direction. There is a button on the knob that functions to hoist and lower the forks. A throttle set up on the stacker's handle moves the device forward and in reverse. This variety of equipment is regularly referred to as a lift truck and is operated from a sit-down position.
Selecting the correct version of pallet stacker can be quite critical as designs will have varying lift functionality, together with varying fork widths. Some models of stackers might only permit two pallets to be loaded at one time, while other versions may be proficient to stack many pallets. Some versions of these lift trucks include an changeable fork so as to allow the jack to slide under pallets of different sizes and shapes. Multiple fork models may be quite successful when different varieties of pallets are being used in the same stockroom.
Click to Download the pdf